via JC Currin - Google+ Public Posts http://ift.tt/1geTtWP
Spar torpedo boats
Main article: Defender class torpedo boat
A further consequence of the Russian scares was that four standard design second-class spar torpedo boats were ordered, one for each of the main ports. These were built in 1883 by John Thornycroft & Co, London. They displaced 12 tons and measured 18.2 x 2.3 x 1 m (63 x 7.5 x 3.2 feet). They were powered from a single shaft with a steam locomotive engine generating 173 hp (130 kW), which give a speed of 17 knots (31 km/h). Their main weapon was an 11 m (36 ft) spar, projecting well forward over the bow, armed at its tip with an explosive device. A Nordenfelt gun was also fitted.
Boat Name Port Service
No. 168 Defender (pictured) Lyttelton 1884–1902 HMS Defender (1883).jpg
No. 169 Taiaroa Port Chalmers 1884–1902
No. 170 Waitemata Auckland 1885–1902
No. 171 Poneke Wellington 1885–1902
The idea was that the boat would proceed at high speed towards the side of an enemy warship, where it would detonate the explosive at the end of its spar. The spar boats were constructed for speed, so they were narrow and shallow, and were armoured with plating only 1.6 mm thick. They could not operate in anything like rough water, and using them as attack vessels may well have been as hazardous for the crew as the target. They were obsolete before they were completed, and only the last two had the up-to-date Whitehead "fish" torpedo fitted when built.
In 1884 torpedo boat units were formed to operate them. They were organised in a similar way to the artillery "Navals" with appropriate naval uniforms. They were at first called the Torpedo Branch of the Armed Constabulary. Then in June 1887 they were gazetted as a permanent militia and given the formal, but more manageable title, Torpedo Corps. The torpedo boats had galvanized plating, which meant they could not stay in the water and had to be kept on slipways. Each Torpedo Corps had its own quarters and boatshed. Their main role soon became training, and by 1900 they were well out of date.[30][31][32]
Main article: Defender class torpedo boat
A further consequence of the Russian scares was that four standard design second-class spar torpedo boats were ordered, one for each of the main ports. These were built in 1883 by John Thornycroft & Co, London. They displaced 12 tons and measured 18.2 x 2.3 x 1 m (63 x 7.5 x 3.2 feet). They were powered from a single shaft with a steam locomotive engine generating 173 hp (130 kW), which give a speed of 17 knots (31 km/h). Their main weapon was an 11 m (36 ft) spar, projecting well forward over the bow, armed at its tip with an explosive device. A Nordenfelt gun was also fitted.
Boat Name Port Service
No. 168 Defender (pictured) Lyttelton 1884–1902 HMS Defender (1883).jpg
No. 169 Taiaroa Port Chalmers 1884–1902
No. 170 Waitemata Auckland 1885–1902
No. 171 Poneke Wellington 1885–1902
The idea was that the boat would proceed at high speed towards the side of an enemy warship, where it would detonate the explosive at the end of its spar. The spar boats were constructed for speed, so they were narrow and shallow, and were armoured with plating only 1.6 mm thick. They could not operate in anything like rough water, and using them as attack vessels may well have been as hazardous for the crew as the target. They were obsolete before they were completed, and only the last two had the up-to-date Whitehead "fish" torpedo fitted when built.
In 1884 torpedo boat units were formed to operate them. They were organised in a similar way to the artillery "Navals" with appropriate naval uniforms. They were at first called the Torpedo Branch of the Armed Constabulary. Then in June 1887 they were gazetted as a permanent militia and given the formal, but more manageable title, Torpedo Corps. The torpedo boats had galvanized plating, which meant they could not stay in the water and had to be kept on slipways. Each Torpedo Corps had its own quarters and boatshed. Their main role soon became training, and by 1900 they were well out of date.[30][31][32]